Volume 55 (2023)
Volume 54 (2022)
Volume 53 (2021)
Volume 52 (2020)
Volume 51 (2019)
Volume 50 (2018)
Volume 49 (2017)
Volume 48 (2016)
Volume 47 (2016)
Volume 46 (2015)
Volume 45 (2014)
Volume 44 (2013)
Volume 43 (2009)
Volume 42 (2008)
Volume 41 (2007)

Pointed Conflict-Free Colouring of Digraphs

Mahdieh Hasheminezhad

Volume 50, Issue 1 , June 2018, , Pages 119-131

https://doi.org/10.22059/jac.2018.68425

Abstract
  In a pointed conflict-free partial   (PCFP) colouring of a digraph, each vertex has at least  one in-neighbour with unique colour.  In this paper,  it is proved that PCFP $k$-colourability of digraphs is NP-complete,  for any $k >0$.  Nevertheless  for   ...  Read More

مدل سازی راکتور هیدروژناسیون روغن سویا

Rahmat Sotudeh Gharehbagh; Leila Niknam; Navid Mostofi

Volume 42, Issue 2 , May 2008, , Pages 165-170

https://doi.org/10.22059/jac.2013.7748

Abstract
  In this paper, a batch hydrogenation reactor performance was modeled using a hydrodynamic and reaction sub-models. The reaction expressions were obtained from the information reported in literature. Experimental studies were conducted in order to generate the experimental data needed to validate the ...  Read More

تولید پودر کامپوزیتی آلومینیم 2024-گرافیت با روش از هم گسیختگی مذاب به کمک فاز جامد

Arman Zare'i Bidaki; Farshad Akhlaghi

Volume 43, Issue 2 , July 2009, , Pages 169-176

https://doi.org/10.22059/jac.2013.7687

Abstract
  In this study, Aluminium2024- Graphite composites containing 5, 10, 15 and 20 weight percent of graphite were produced by solid assisted melt disintegration (SAMD) technique which resulted in production of Al/Gr powder mixtures which subsequently consolidated and sintered for preparation of Al/Gr composites. ...  Read More

استفاده از الگوریتم ژنتیک در مسائل کوتاهترین مسیر چند معیاره بر پایه سیستمهای اطلاعات مکانی

Parham Pahlevani; Mahmoud Reza Delavar; Farhad Samad Zadegan

Volume 42, Issue 3 , July 2008, , Pages 287-299

https://doi.org/10.22059/jac.2013.7759

Abstract
  Multi-criteria shortest path problems (MSPP) are called as NP-Hard. For MSPPs, a unique solution for optimizing all the criteria simultaneously will rarely exist in reality. Algorithmic and approximation schemes are available to solve these problems; however, the complexity of these approaches often ...  Read More

ارائه روشی جدید برای طراحی الگوی چال های انفجار در معادن روباز

Hassan Moomivand

Volume 41, Issue 3 , September 2007, , Pages 355-361

https://doi.org/10.22059/jac.2013.7855

Abstract
  A comprehensive investigation was carried out to minimize the cost price of the rock fragmentation process including: drilling, blasting, secondary blasting and separating the large boulders (oversize rocks) while loading, until the optimized fragmentation, powder factor and ratio of burden (B) to blasthole ...  Read More

مقایسه نتایج حل ترموالاستیک نیم‌فضا میان

Mohammad Shariyat; Ali Reza Askari

Volume 41, Issue 4 , November 2007, , Pages 443-450

https://doi.org/10.22059/jac.2013.7865

Abstract
  In this paper, transfinite element method is used to analyze the two dimensional thermoelasticity problems. A comparison is made between the thermoelastic analysis results of the classical theory and theories with one or two relaxation times (i.e. L-S and G-L theories), for the half space problem. Governing ...  Read More

معرفی ستون جدار نازک توخالی ساخته شده از ورقهای فولادی موج‌دار و بررسی رفتار لرزه‌ای آن

Seyyed Rasoul Mirghaderi; Seyyed Mohammad Saeed Sobhan

Volume 42, Issue 4 , August 2008, , Pages 509-521

https://doi.org/10.22059/jac.2013.7769

Abstract
  Thin-walled hollow steel columns, either circular or box shaped, are commonly used as piers in bridges. Recent earthquakes, e.g. Hyogoken-Nanbu or Kobe 1995, on the other hand have shown that these columns are vulnerable to damage when subjected to earthquake loading. This paper presents a new innovative ...  Read More

ریز ماشینکاری PET با استفاده از لایه برداری شیمیایی در حضور

Nima Izadi; Amir Samak; Shamsoddin Mohajerzadeh

Volume 41, Issue 5 , December 2007, , Pages 567-576

https://doi.org/10.22059/jac.2013.7879

Abstract
  In this paper, we report vertical etching of poly-ethylene-terephtalate plastic substrates by means of a chemical solvent and in the presence of ultra-violet illumination. Since the PET substrate is not dissolved in solvent without a UV source, only the desired areas with proper opening for UV exposure ...  Read More

مدل‌سازی و شبیه سازی خطاهای سیم بندی استاتور موتور القایی قفس سنجابی با استفاده از روش مدار معادل مغناطیسی

Karim Abbaszadeh; Mohammad Ardebili; Esmaeel Sarani

Volume 43, Issue 5 , September 2009, , Pages 669-679

https://doi.org/10.22059/jac.2013.7728

Abstract
  Induction Motor especially the squirrel cage type of this motor plays important role in industry. According to the application type, this motor place against various stresses that are caused failure in the motor. The most common failure is related to the Stator winding. Among these failures are turn-to-turn, ...  Read More

اثر عامل حالت در بهبود پیش بینی رخداد نوار برشی در خاک های دانه ای

Ali Lashkari; Manouchehr Latifi

Volume 42, Issue 6 , December 2008, , Pages 775-783

https://doi.org/10.22059/jac.2013.7795

Abstract
  The capability of sand constitutive models is remarkably improved by taking into account the effect of soil state in their formulations. In this study, it has been shown that considering the effect of soil state leads to better simulation of soil instability of shear banding type. To this aim, constitutive ...  Read More

ارزیابی کارآیی TCSCدرکاهش اضافه بار خطوط و پایداری ولتاژ درهنگام وقوع خطا

Mehrdad Tarafdar Hagh; Seyyed Jalal Kazempour

Volume 42, Issue 7 , January 2009, , Pages 891-899

https://doi.org/10.22059/jac.2013.7809

Abstract
  Although many mathematics-based and heuristic approaches have been recently developed on optimally allocation of TCSCs for lines overloads reduction and buses voltage stability enhancement during fault conditions, the works on the TCSCs efficiency to achieve the abovementioned goals are rare. This idea ...  Read More

شبیه‌سازی تقاضای برق صنایع ایران با استفاده از سیستم داینامیک

Parisa Mousavi Aharanjani; Seyyed Farid Ghaderi; Mohammad Ali Azadeh

Volume 41, Issue 7 , February 2009, , Pages 943-953

https://doi.org/10.22059/jac.2013.7905

Abstract
  Nowadays, electricity is one of the most significant infrastructures required for economic development of countries. Hence, predicting electricity demand is very important especially in industry as a major electricity-consuming sector. The majority of studies under the subject of electricity demand have ...  Read More

تحلیل آماری و مدل سازی فاز اسپورزایی در فرآیند تخمیر باکتری باسیلوس تورنژنسیس جهت تحلیل تأثیر اکسیژن و زمان کشت بر فعالیت حشره زدایی آن

Azam Najaflou; Mohammad Hossein Sarraf Zadeh; Abbas Gerami

Volume 42, Issue 8 , February 2009, , Pages 1025-1034

https://doi.org/10.22059/jac.2013.7821

Abstract
  Due to the importance of Bacillus thuringiensis (Bt) in the biological fight, it is necessary to optimize its fermentation process and decrease its production cost. Statistical analysis is used not only to optimize fermentation conditions but also to describe and predict the culture behavior. In production ...  Read More

مدل سازی تیر های پیوند بتن مسلح عمیق با آرماتورگذاری متعارف در دیوارهای برشی

Masoud Riazi; MOhammad Reza Esfahani

Volume 41, Issue 1 , March 2007, , Pages 47-60

https://doi.org/10.22059/jac.2013.7831

Abstract
  In this research, using the Modified Compression Field Theory (MCFT), a new model is proposed to predict the behavior of reinforced concrete coupling beams. The model is able to consider the effects of shear and axial forces and bending moment, simultaneously. The proposed model includes a nonlinear ...  Read More

Randomized Algorithm For 3-Set Splitting Problem and it's Markovian Model

Mahdi Heidari; Ali Golshani; D. Moazzami; Ali Moeini

Volume 47, Issue 1 , June 2016, , Pages 79-92

https://doi.org/10.22059/jac.2016.7944

Abstract
  In this paper we restrict every set splitting problem to the special case in which every set has just three elements. This restricted version is also NP-complete. Then, we introduce a general conversion from any set splitting problem to 3-set splitting. Then we introduce a randomize algorithm, and we ...  Read More

Tenacity and some related results

Dara Moazzami

Volume 49, Issue 1 , June 2017, , Pages 83-91

https://doi.org/10.22059/jac.2017.7986

Abstract
  Conceptually graph vulnerability relates to the study of graphintactness when some of its elements are removed. The motivation forstudying vulnerability measures is derived from design and analysisof networks under hostile environment. Graph tenacity has been anactive area of research since the the concept ...  Read More

Eye Tracking for Autism Disorder Analysis using Image Processing

Zohre Kiapasha; Iraj Mahdavi; Hamed Fazlollahtabar; Zahra Kiapasha

Volume 51, Issue 2 , December 2019, , Pages 83-98

https://doi.org/10.22059/jac.2019.75178

Abstract
  Analyzing eyes performance is essential for effective functioning of human. Therefore, following their motion could help doctors to make quick and accurate diagnoses for disorders like Autism, schizophrenia, or attention deficit hyperactivity disorder. Recently, several studies investigated autism disorder ...  Read More

Some new restart vectors for explicitly restarted Arnoldi method

Zeinab Abadi; Seyed Abolfazl Shahzadeh Fazeli; Seyed Mehdi Karbassi

Volume 51, Issue 1 , June 2019, , Pages 91-105

https://doi.org/10.22059/jac.2019.71545

Abstract
  The explicitly restarted Arnoldi method (ERAM) can be used to find some eigenvalues of large and sparse matrices. However, it has been shown that even this method may fail to converge. In this paper, we present two new methods to accelerate the convergence of ERAM algorithm. In these methods, we apply ...  Read More